Product descriptions from the supplier
Overview
Product Description
Brief Introduction
This equipment is developed and tested by our own company.It has all the advantages of the same kind of development.It is mainly used in one-time bus bar and the changeable items of all kinds of current mutual inductance.As it adops low consumable power and large capicaty of the voltage regulator and the converter is made up of iron core with high magnetism conduction.This facality has the advantage of being small in volume and light in weight.On account of these advantages,it has been widely used in research and production of electricity, railways,petrifaction,metallurgy and mine ,even the scene of electrical experiment.
Product Features
1. Before power supply connected, turn the handle of the electric current regulator anti-clockwise back to “Zero”. 2. After power supply connected, push “ON” of the power switch, turn the handle of the electric current reulator cockwise until the necessary output electric current, and the specific property experiment can be done to test the device. 3. When doing shocking experiment, first regulate the necessary electric current, then push “OFF” of the power switch to cut off power, again push “ON” to connect power supply, and last the to-be-tested device can be experimented. 4.This equipment is large in exorting power,with 220V alternating current power supply,so that it must have enough capacity;with thick and short power wire to support the alternating current power. 5.Before using,the importing power wire must be checked and the demands of length and section must be met. The length and section of the importing wire changes with the increase of the current(10 ampere/square mm). 6.If there is an errer with the indicating instrument,standard meter can be used.
