Share BuyProducts Channel
1/5
HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment / 1HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment / 2HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment / 3

HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment

2024-10-15 16:40330
Price ¥20.00/Piece
Min quantity 10Piece
Quantity 20000Piece

 

I.Overview

HZJF-9011D partial discharge detector is a new type of digital partial discharge detector developed by our company. It retains the advantages of JF-A01N partial discharge detector, reduces the volume and optimizes the performance. It uses 10.1 inch touch screen to replace the traditional operation mode of oscillograph and physical knob, making it more convenient to use.The instrument adopts full touch screen operation, which not only improves the service life of the operation, but also has the following functions: one key automatic correction; high voltage test voltage divider ratio can be set; serial communication upload test data. The instrument has the characteristics of high sensitivity, wide application range, wide dynamic range of amplification system, multiple frequency band combinations (nine kinds), and strong anti-interference ability. It is a practical partial discharge testing instrument widely used by electric power departments, manufacturers and scientific research institutes.

 

II.Main Technical Indicators

1. The equivalent capacitance ranges from 6pF to 250 μ F

2. Number of channels: single channel

3. Measurement range: 0.1pc-10000nc

4. Detection sensitivity and allowable current (see Table 1)

 

NO.

Tuning Capacitance Range

Sensitivity (PC)

(Unbalanced Circuit)

Effective Value Of Allowable Current

Unbalanced Circuit

Balance Circuit

1

0~25~100pF

0.02

30mA

0.25A

2

25~100~400pF

0.04

50mA

0.5A

3

100~400~1500pF

0.06

120mA

1A

4

400~1500~6000pF

0.1

0.25A

2A

5

1500~6000~25000pF

0.2

0.5A

4A

6

0.006~0.025~0.1μF

0.3

1A

8A

7

0.025~0.1~0.4μF

0.5

2A

15A

8

0.1~0.4~1.5μF

1

4A

30A

9

0.4~1.5~6.0μF

1.5

8A

60A

10

1.5~6.0~25μF

2.5

15A

120A

11

6.0~25~60μF

5

25A

200A

12

25~60~250μF

10

50A

300A

7R

Resistance

0.5

2A

15A

 

Table 1. Detection sensitivity and allowable current value of input unit

5. Elliptic scan time base

(1) Frequency 50/60, 100, 150, 200, 400Hz

(2) Rotation: 30 ° as the first gear, and can rotate 120 °

(3) Working method: ellipse sine wave straight line

6. Display unit

10.1 inch capacitive touch screen is used.

7. Amplifier

(1) 3dB low frequency fl:10, 20, 40KHz optional

(2) 3dB high frequency fh:80, 200, 300kHz optional

(3) Gain adjustment, rough adjustment 6, inter gear gain difference 20 ± 1dB, fine adjustment range >20db

(4) Asymmetry of positive and negative pulse response < 1dB

8. Time window

(1) Window width: adjustable, 5 ° ~ 170 ° at 50Hz

(2) Window position: each window can rotate 0 ° ~ 170 °

(3) Two time windows can be opened separately or simultaneously.

9. Peak pulse display

The touch screen displays 1 decimal place (10pc or more), 2 decimal places (less than 10pc), error: ± 3% (in full scale)

10. Test voltage display

(1) Range 150kV

(2) Input impedance: >1m Ω

(3) Display: touch screen display, display 1 decimal place

(4) Error: ± 1%

11. Test frequency display

Error: less than ± 1%

12. Zero standard system

Zero sign is consistent with all ellipse scanning frequencies

13. Structure

(1) Dimensions: 370mm (width), 460mm (depth), 215mm (height)

(2) Weight: about 12.5kg



HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment

HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment

HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment    

HZJF-9011D Single Phase Partial Discharge Tester 1 Channel PD Detection Equipment    



    

Hate 0
Favorite 0
Comment 0
Contact
Buy